Notifications
Back

The Go On

Dry Heating Corporation


· Suitable for remodeling buildings

· You can install floor heating relatively easily

· There is no noise or dust during construction

· The heat of the floor heating rises quickly

Order of construction

1. Installation of primary insulation (8 mm)

2. Installation of secondary insulation (4.5 mm)

3. Configuring a Frame

4. Insert carbon fiber heating element

5. Installing the Aluminum Thermal Diffusion Sheet

6. Installation of protective plate

7. thermostat installation

8. Installation of zinc steel sheet

9. Fever test

Installation sectional view


 Height of floor after installation 1.5 cm to 2 cm 

Spec

Name
Function 
insulation Width 1 m × 50 m Thickness: 4.5 mm
▶ Insulation that prevents heat from going down to the floor to prevent heat loss and moisture.
insulation
Width 1 m × 50 m Thickness: 8 mm
▶ Insulation that prevents heat from going down to the floor to prevent heat loss and moisture.
Carbon fiber heating element 

Effective carbon fiber : 24K (24000 strands)
coating : Heat-resistant silicone
Electric capacity : 28w/1m, 504w(18m)/1 flat

new material carbon fiber
▶ My fever: I don't ride in high temperature.
▶ durability: 1/5 light and more than 10 or more.
▶ flexibility: flexibility.
Aluminum Thermal
Diffusion Sheet
0.6 m (width) × 50 m (cell) Thickness: 0.3 mm
▶Excellent thermal conductivity using high-purity aluminum.
▶ It can maximize cooling and heating efficiency.
fiber protection plate 
1 m (width) × 1.2 m (length) Thickness: 2 mm
▶ Excellent heat preservation performance and prevent rapid temperature changes.
▶ inhibition of fungal or bacterial growth
zinc steel sink
0.6 m (width) × 1.2 m (length) Thickness: 0.8 mm

▶ It makes it easy to install floor finishes (plates, decor tiles, etc.)

▶ It protects carbon fibers and can put heavy loads on them

thermostat 
4kw capacity thermostat

▶It is a front-fastening 4 kW thermostat.

▶You can adjust the temperature from 1 to 10 stages

▶It has a timer function

▶It can be used in various ways for electric heating products.

▶ Minimize power waste and prepare for safety accidents by preventing long-term use of high temperatures.

▶Apply PC ABS flame to prevent safety accidents due to heat resistance